dond Posted June 3, 2006 Share Posted June 3, 2006 I am working on a piece about the MSSA and would like to see and use other members' pics concerning this award. The article is for GMIC members to use. Here is my JUNCKER badge. Thanks for anyone who contributes. If you want to show something but not have it used that is fine also. Just state so please.Thanks again. Link to comment Share on other sites More sharing options...
dond Posted June 3, 2006 Author Share Posted June 3, 2006 As you can see it is a nice salty piece that has been worn at some point in it's life. The reverse with makermark. Link to comment Share on other sites More sharing options...
Daniel Murphy Posted June 6, 2006 Share Posted June 6, 2006 Don, Here are mine. This one is a alloy piece (Zinc?) with a similar back plate. There is just a hint of the original gold wash and is a sort of riveted construction. There is no maker mark that I can see and I have had it approx 20 years. Obverse. Link to comment Share on other sites More sharing options...
Daniel Murphy Posted June 6, 2006 Share Posted June 6, 2006 Reverse. Link to comment Share on other sites More sharing options...
Daniel Murphy Posted June 6, 2006 Share Posted June 6, 2006 Here is another. Stamped steel with a gold wash or plate. The back plate is missing due to some the prongs being broken. It has been sewn to the backer and the rust has discolored the thread. Had this one about 13 years. Obverse. Link to comment Share on other sites More sharing options...
Daniel Murphy Posted June 6, 2006 Share Posted June 6, 2006 Reverse. As you can see the pins were of the small wire type. Link to comment Share on other sites More sharing options...
Chris Boonzaier Posted June 6, 2006 Share Posted June 6, 2006 That has a lot of Pins !! Link to comment Share on other sites More sharing options...
Daniel Murphy Posted June 6, 2006 Share Posted June 6, 2006 (edited) Chris, Uh... No. There are only two pins remaining. They are shown below highlighted in yellow. The rest is the rust stained gray thread that was used to sew it down after the pins and plate were lost.Dan Murphy Edited June 6, 2006 by Daniel Murphy Link to comment Share on other sites More sharing options...
dond Posted June 7, 2006 Author Share Posted June 7, 2006 Thanks Dan.C'mon guys, let's see some more. Link to comment Share on other sites More sharing options...
Tom Y Posted June 8, 2006 Share Posted June 8, 2006 Juncker Link to comment Share on other sites More sharing options...
Tom Y Posted June 8, 2006 Share Posted June 8, 2006 Back. Sorry the mm doesn't show better, but it's a light stamping. Link to comment Share on other sites More sharing options...
Tom Y Posted June 8, 2006 Share Posted June 8, 2006 .. Link to comment Share on other sites More sharing options...
Daniel Murphy Posted June 8, 2006 Share Posted June 8, 2006 Tom, I have heard of items being kept "under glass", but this gives it a new meaning. Dan Murphy Link to comment Share on other sites More sharing options...
joe campbell Posted June 8, 2006 Share Posted June 8, 2006 appears to be a very nice array of MG badges!thanks,joe Link to comment Share on other sites More sharing options...
dond Posted October 22, 2006 Author Share Posted October 22, 2006 Bringing this back to the top to see if there is more interest in these.thanks Link to comment Share on other sites More sharing options...
Chris Boonzaier Posted October 22, 2006 Share Posted October 22, 2006 I for one an very interested.... but have little I can aid you with...Cmon you lazy bggers.... get your pics over to Don !!!! Link to comment Share on other sites More sharing options...
David Gregory Posted October 22, 2006 Share Posted October 22, 2006 Don,I am still very much interested, I just haven't found an affordable one yet that I really like.Cheers,David Link to comment Share on other sites More sharing options...
Chip Posted October 23, 2006 Share Posted October 23, 2006 dond,How many makers do you currently have? I contributed mine to the thread you started on the WA website.Chip Link to comment Share on other sites More sharing options...
dond Posted October 24, 2006 Author Share Posted October 24, 2006 Hi Chip. At least three different ones so far. How about tossing yours on here too.thanks Link to comment Share on other sites More sharing options...
dond Posted March 24, 2007 Author Share Posted March 24, 2007 Here's another one, made by the Stuttgart Metallfabrik. This badge is almost entirely of zink except for the pins soldered to it for fastening to the backing plate. Remainents of a finish are visible. Link to comment Share on other sites More sharing options...
dond Posted March 24, 2007 Author Share Posted March 24, 2007 The reverse. Note that the pins are bent in the same pattern as the Juncker. Link to comment Share on other sites More sharing options...
dond Posted March 24, 2007 Author Share Posted March 24, 2007 Here is another that I missed on ebay due to a technical difficulty- I was drinking. Made by Carl (or Karl) Leburg of Strassburg. Link to comment Share on other sites More sharing options...
dond Posted March 24, 2007 Author Share Posted March 24, 2007 The reverse. It has much in common with the others originals in its construction. Link to comment Share on other sites More sharing options...
Chris Boonzaier Posted March 30, 2007 Share Posted March 30, 2007 For ages I have thought of these as MGSSA badges, but I just recieved a photo of a regular infantry regt MGK and they all have it (or most of them)Can it be that it is a graduation badge from the MG school and not for folks attached to a MGSSA ? Link to comment Share on other sites More sharing options...
dond Posted March 30, 2007 Author Share Posted March 30, 2007 I've always thought it was given out for graduating a specialty course on machinegun operations. You rarely see everyone in a unit wearing it. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now