johnnymac

Rob, As far as my Serbia be marked, the answer is no. It is identical to several others of this type, some marked France on back strap and others without any mark. I have two that have the same obverse, but only one of them is marked "FRANCE". When I can get to them I will post. This is a new purchase and is a different type clasp then Serbia grouping, but it to comes with and without marking. Two of the three back straps are marked made in France and note the height of the back strap of the unmarked one. Regards, Jim

Rob, I do agree with all that you said. Regards Jim

Also note that Stubley's "Army of Occupation" and"Defensive Sector" clasps in my illustration are identical to his "Serbia" clasp. It is not anything like the one in Laslo's illustration on page 119 of Laslo's book. See my illustration of what I think are Art Medal Works Inc. clasps. The letter style of the two clasps, that you believe to be BB&B, are identical to the letter style used by "Art Medal Works Inc." for their Navy clasps. Please read in A. Laslo's book on page 93, paragraph 1 & 2. Alexander Laslo states that the Jos. Mayer's had a illustrated catalog 1933, but he does not mention that there was an "illustrated" catalog in the case of Geo. Stubley. Regards, Jim

Rob, Within a 150 mile radius of me, there are at least 12military collector shows a year. They house between 200 to 800 tables. I attend only the two largest because mostitems are a repeat. Most of the dealersknow my interest, so I find two shows a decent number. The BB&B pilot wing & badgecollectors are there. You referenced in Laslo's bookThe "Army of Occupation" being a BB&B and sold by Stubley in hiscatalog. In Tim's illustration of Stubley's catalog, there is no mention of BB&B and no photos to show how each clasp looked. Stubley does list an"Army of Occupation" and a "Defensive Sector" clasp, but he also lists a "Serbia" clasp. His "Serbia clasp" is the only one of "all" the different types of unofficial clasps of which I know. See my illustration of George Stubley's clasps

Yes, thanks for the posting, Tim I have not seen this before. Tim I count 5, unofficial clasps not 4, Chateau-Thierry,Cantignety, Soission, Verdun and Serbia. Cambria is spelled wrong maybe it is a type-o as we know that it is (Cambrai),but a lot of folks might think it was Sub Chaser. Note too, that the White Sea clasp is missing in his listing, plus it is missing below with the Asiatic clasp. Studley's, I had held he started his businessin the old 20's to early 30's, and Inot sure, but I think he passed on in the 60' or 70's. Thanks Jim

Hey Rob, I just woke up, forget this part of my posting (Most items use the abbreviation of U.S.M.C. because M.C. is too informal it would be like sayingNavy when in fact its Royal Navy). I am sure, M.C. is for Medical Corps and not Marine Corps. Could you post a photo of the stamping on this medal. Jim

Hi Rob, There are so many interesting things about this medal. I hope to give you my interpretation of yourmedal. Having said that, this is the type of medal that I enjoy finding myself. You have mention again, as you have in the past, that you believe that the "DEFENSIVE SECTOR" type clasp, that is attached tothis medal, was a product of Bailey, Banks & Biddle Co. Having 23 loose clasps of this type myself,has enabled me to examine the back straps of each one. To date, I have not found one with the BB&B stamp on them. In talking to BB&B collectors and asking them if this type clasp was too small to warrant a stamp, the answer has always been "no". They have shown me items much smaller with the BB&B stamp. Again having said that, I believe as well, there still might be a BB&B connection to this clasp or maybe another type clasp I own. Since you feel so strongly that this type clasp is a BB&B, have you found the missing link like a catalog or a good photo document that can be shared and would shed some light on this subject? The brooch on this medal is very close to the French-made repro victory medals, so could there be a connection? See my attached posting#1. As for the missing spacer I have several that are that wayand they are an original issue. Afterfurther examination of your clasp, I have questions. Here's why: 1. On the AISNE-MARNE clasp, note that the halfmoons seem to be deeper. The clasp has more of a brass color, not like the riverside bronze of the ones above or below. 2. Looking at the letters in the AISNE-MARNE clasp, I see by your photo, the style is slightly different than the normal original issue clasps. Note that the lower bottom of the letters on this clasp seem to be missing the pyramid shape on each of these letters"A-I-N M-A-R-N" compared to the above clasp. 3. On the reverse side, the back strap for the same clasp AISNE-MARNE is much smaller inlength. It matches the same length asthe bottom one, which is the Defensive Sector clasp. Additionally, the reverse side of the half moons, match the ones on the Defensive Sector clasp. The other three clasps match each other. As we both know the combination of clasps would make this a 42nd Division medal, or one of another other units (or a person possibly in the MTC) which were also awarded this combination. As for WM. F. PATTEN M.D. MAJOR M.C., I am not sure, but wouldn't the correct protocol in the military be: MAJOR WM.F. PATTEN M.D. U.S.M.C.? It appears to me that the title would precede the name. For example, WM. F. PATTEN LORD RN would be LORD WM. F. PATTEN, RN. Most items use the abbreviation of U.S.M.C. because M.C. is too informal it would be like saying Navy when in fact its RoyalNavy. I mentions this because you stated that the engraving appearsto hand stamped - Could you post a photo of the staming. There are to two ways of looking at situation in my mind. Someone may have wanted to embellish this medal or William took thismedal to someone and had the work done himself! Hope that my observations, bring a new way of looking atthis medal. Regards, Jim

Changing subject, To All I purchased on ebay a British War Medal plus a WWI, U.S. NavyVictory Medal (no clasp) for $1. and $6 S&H. I do not have connections to get information on Britishservicemen, so I am asking if someone does, will they look up LIEUT. H.H.R.VIBART. Thank You, JM

To All Can someone post a large and clear side by side illustrationof both the obverse and reverse sides to show the different between the Italian"Official type 1" and the Italian "Reissue type 1" sincethey both are by the same manufacturer but at different time period. Thanks JM

Hello Rob Regards, JM

(JM)

Tim After enlarging Lasko's photo and seeing that the top point of his five pointed star completely covers the buckle's top cross bar which is around 3mm. Laslo's star which he illustrated is much larger then 3mm. The open area inside the buckle is 6mm+. Was there a misprint of a 3 when it should have been an 8, I do not know? But in my illustration you see that there are 10 threads in the middle section of the buckle, it take's 4 threads to equal 3mm. I placed a star which is 3mm on the top cross bar of the buckle. See how much smaller it is than the star in Laslo's illustration? Having said that, I agree, what we need is more information, more documentation and a good Portuguese medal collector. (JM)

To all interested persons, but request I have moved thisposting to "WWI Victory Medals of the World" - Page 27, posting #536

To All I matched the two Vic's ribbons for scaling. Also in the color photo you see that the buckles are the same size. In measuring all four cross arms (top, bottom and bothsides) of the two buckled I have, all are 3mm. The inside open area of the buckle where the device would be placed, itsmeasured at 6mm. The original "star" in the color photo shows that its left and right top cross arms do not come close to the bottom of the buckle's cross arm, like it is shown in Laslo's photo. Knowing that the open area inside the buckle is 6mm, I would guess that the colored star is 6mm, andnot 3mm. Of course this is mostly guess work not having the medal in the color photo. Laslo writes that the silver star is 3mm. Using his photo it can be seen that his star covers all of the middle opening (6mm) plus the top cross bar of the buckle (3mm) which put at 8-9mm. So the 3mm in his book must be a misprint. In surfing the webb for the information on my posting I have come across at least 30 photos of Portuguese medals, some pre 1900 and some post 1920. What I found interesting was that the center devices were large and sat on top of the buckle. My thoughts only - To me, the large device is a way to prevent the buckle from slipping down the ribbon. It is also written by Laslo that the buckle may have served as a way to secure the ribbon over a metal hanging suspension, then why have buckles in bronze, silver and gold. To me it is clearly an award since there are to many Portuguese medals with out a buckle. Plus I add this about the buckle - on the all items that had a buckle, that I have handled, one end had to be secured to the buckle. Last, there is just not enough room to double fold both sides of the ribbon through the blackstrap. (JM) I super-imposed a star in my photo posting just for scaling.

Hi Rob, My main goal was to fast track it, hopefully get a Portuguese medal collector's feed back. But I see your point and I will post my next illustration to WWI Victory Medal of the World. Then there will be two places were I might get the answerer to my question. Rob - since we all are at times working off a photo we do not get to see all the details of that piece. But don't you see any relationship to the French stars shape andsize? I do realize that most of theEuropean Official Victory medals have a back ground with either France or Czechoslovakia and I found that the relationship is also in the unofficial types. In surfing the web I have discovered that the Portuguese medals pre 1900's and post 1920 used a oversized attachment in the center of their buckle and the device was color matched to the a attachment (Bronze tobronze, silver to silver ect). This information is from posting and photos in 2006, from the OMSA forum. (JM)

Hi Tim Referring to my earlier posting - On the bottom vic medal which you just did a reply too, I would totally agree with you, it looks out o fplace. Again referring to my earlier posting - On the top vic medal note how much the first medal's star matches the star used by the French. My illustration shows a yellow box around one with three stars in it. The two stars on each end are silver and note how dull they are. All "metals" oxidize to some degree no matter how well they are kept. Yet, the photo of the star on the top of my earlier posting looks like it just came out of the box. The medal and star in question is on the bottom of my latest posting. (JM)

Hi Tim, thanks for your input, . I posted a secondmedal also with a large star from the OMAS forum site (there was no date forthis medal). Regards JM

Hello again Kevin The medal with the one silver star which I posted was fromthe web site of OMAS Forum - 2006 Onemember posted this question: The Obverse states: Republic Portuguese, Public Safety. Reverse states: Humility, Patriotism,Dedication and Altruism 1926. This is a Police Public Safety Medal for the servicesstated on the reverse of the medal. I have been unable to find out the meaningof the star attached to the ribbon and would appreciate feedback regarding itsmeaning. The answerer he received came from: Jorge Filipe Brandao Quinta-Nova Coleccionador de Codecoracoes Militares Portuguesas. And he replied back"According to the 1929 legislation, this is the Assiduity medal forsecurity forces, Article 15 of this regulation states the design of the decorationalways in silver and that 1silver star is for 10 yrs. service, 2 stars 20 yrs.and 3 stars for 30 yrs". So I think someone out there thinks that this Star and itssize is official, that is why I posted it. As for the buckle, in looking for my answerer I have seenmany buckle that were over sized, just right and slightly tight. Maybe at the time their mfg. standards werenot what they were in the U.S.A. JM

Hello Kevin, As we all know not all things were available to the collecting world market in 1992. Lasko's book is very much the standard we all use, but because new items turn up on the new market " the world wide web", we have to question them. That is one of the joys of collecting. Lasko's himself did a second edition on his book because there was more information to get out. You say: "DecreeNumber 6:756 of the 10th July 1920 established a silver star suspension andservice ribbon device to recognize those persons who served in combat as defined by Decree No:6186". But "do" we know for a fact that there were no other decree's ever made for the Portuguese Victory medal in the next 90 years? Yes it could be an after market buckle and stars and if so, might be covered by the fact that many of the veterans did not get their medals from the their own government (which happen in many other countries), but they did purchased their Victory medal from private suppliers. Maybe we will get someone who will read this posting and who can fill in the missing pieces. (JM)

Hi Rob, good to see you back: I purchased this on a "buy now" the price was wellunder $50. It come from Canada and theseller stated that it was his Great Grandfather's (which all have heardbefore). But he also listed severalother WWI items, 2 badges & 1 belt buckle (all Portugal) and all at a verylow price. His feedback for items soldwas for household items and his rating was (482) for items sold. My question then is? Why have I not seen this type buckle beforeand if is a repro, and why not at least make it like the silver star one (whichis known to be good). True it wouldembellish the award but it would also leave a lot of questions. So why not do one silver star and call it aday. The Buckle is around 37mm by 11.5mm and the stars are the typeyou bend the two pins back (The stars and buckle are not made as oneunit). The back-strap of the buckle isforced bent into the ribbon on the reverse side (possibly by the owner). Which might account for some of tightness atthe ribbon sides. As you have pointedout in the past on ribbons, there could be a slight difference betweenMfg. Just maybe this two bronze star buckle combo was issued at alater date for reasons yet not known. As always regards (JM)

Hi Tim, Thanks for the feedback. I too believed it only come with one silver star, plain or with a"C" which was listed in a earlier GMIC forum (2007). JM

Can I get a little help here, why the two bronze colored stars? Thanks, JM